Page 1 of 4
Faction tier change explained!
Posted: November 16th, 2013, 7:49 pm
by woot
Hi,
there will be a change on faction tiers
regarding Luigi_Tattaglia's suggestion which will allow faction leaders to control their faction better.
Factions now have 4 tiers, tier 0 being the highest tier (leader) and tier 1-3 being members.
- Tier 0 does not change.
- Tier 1 does not change.
- Tier 2 is the same as tier 3 but may have special permissions added by the faction leader.
- Tier 3 is the same as the previous tier 2 and may not have special permissions added by the faction leader.
Every time you are invited to a faction, your authorities are reset and you have none.
Every time your tier is changed in a faction, your authorities are reset and you have none.
A tier 2 faction members may have a maximum of 3 authorities at a time.
The following changes related to faction tiers are thus introduced:
ALL FACTIONS
- Tier 0, tier 1 and tier 2 (only with the FREQ authority) may use /setfreq
- Tier 0, tier 1 and tier 2 (only with the INVITE authority) may use /invite
- Tier 0, tier 1 and tier 2 (only with the UNINVITE authority) may use /uninvite
- Tier 0, tier 1 and tier 2 (only with the UNINVITE authority) may use /ouninvite
ILLEGAL FACTIONS
- Tier 0, tier 1 and tier 2 (only with the FSTOCK authority) may use /fstocktog
- Tier 0, tier 1 and tier 2 (only with the WAREHOUSE authority) may use /whupgrade
- Tier 0, tier 1 and tier 2 (only with the WAREHOUSE authority) may use /whopen
- Tier 0, tier 1 and tier 2 (only with the WAREHOUSE authority) may use /whclose
- Faction wars:
- Tier 0 member is worth $150k
- Tier 1 member is worth $120k
- Tier 2 member is worth $100k
- Tier 3 member is worth $70k
LEA FACTIONS
- LEA tier 3 may jail maximum 15 minutes
- Tier 0, tier 1 and tier 2 (only with the BARRIERS authority) may use /bdeploy
- Tier 0, tier 1 and tier 2 (only with the BARRIERS authority) may use /bremove
- Tier 0, tier 1 and tier 2 (only with the WEPLIC authority) may use /weplic
A new command has been added for faction members:
/fauthority
- If a faction member uses this command, it will display a list of their authorities.
- If a tier 0 uses the command, the usage is as following;
- /fauthority <playerid> - will display a list which authorities the specified member currently has
- /fauthority <playerid> <add/remove> <warehouse/invite/uninvite/freq/fstock/barriers/weplic> - toggle the authorities on this member
K3lroy wrote:I wasn't a fan of the new system before it was implemented.
Found it too time consuming to use, but after setting up my parameters in excel, it actually makes everything much easier to use.
Here's how I approach the system.
Re: Faction tier change explained!
Posted: November 16th, 2013, 7:49 pm
by JeromeR
Hmm. I liked the old system better but I guess it'l work out.
Re: Faction tier change explained!
Posted: November 16th, 2013, 7:50 pm
by Zeldak
glad to see this happen, I like it
Re: Faction tier change explained!
Posted: November 16th, 2013, 7:50 pm
by Altierri
How many authorities can a T2 member have at max?
Re: Faction tier change explained!
Posted: November 16th, 2013, 7:50 pm
by Aleya BANNED
Real. Fucking. Nice!!!!!
Re: Faction tier change explained!
Posted: November 16th, 2013, 7:50 pm
by Flstene
I like it
Re: Faction tier change explained!
Posted: November 16th, 2013, 7:50 pm
by Matt_baker
Nice,i like it.We need it.
Re: Faction tier change explained!
Posted: November 16th, 2013, 7:51 pm
by Pedojoey
FACK YA love it
Re: Faction tier change explained!
Posted: November 16th, 2013, 7:51 pm
by Noam
Ice cold, woot.
Re: Faction tier change explained!
Posted: November 16th, 2013, 7:51 pm
by Jerome
I was actually aversing this suggestion but, whatever..
When is this going to be implemented?
Re: Faction tier change explained!
Posted: November 16th, 2013, 7:51 pm
by Zeldak
Altierri wrote:How many authorities can a T2 member have at max?
good question
Re: Faction tier change explained!
Posted: November 16th, 2013, 7:52 pm
by TBA
Good job woot , love it!
Re: Faction tier change explained!
Posted: November 16th, 2013, 7:53 pm
by kiss_of_kill
Zeldak wrote:glad to see this happen, I like it
Re: Faction tier change explained!
Posted: November 16th, 2013, 7:54 pm
by woot
Altierri wrote:How many authorities can a T2 member have at max?
A tier 2 faction members may have a maximum of 3 authorities at a time.
Re: Faction tier change explained!
Posted: November 16th, 2013, 7:55 pm
by Flstene
T2 can tow the cars?
Re: Faction tier change explained!
Posted: November 16th, 2013, 7:57 pm
by Aleya BANNED
Flstene wrote:T2 can tow the cars?
It would be useful if that authority will be added. Especially for PD.
Re: Faction tier change explained!
Posted: November 16th, 2013, 7:58 pm
by Zeldak
Indeed about the tow and ftog, what about maximum t2s?
Re: Faction tier change explained!
Posted: November 16th, 2013, 7:59 pm
by Anton Ivanovich
kiss_of_kill wrote:Zeldak wrote:glad to see this happen, I like it
Tier 2 can /fcartow? /ftog?
Re: Faction tier change explained!
Posted: November 16th, 2013, 8:02 pm
by BUTCHER
Nice
Re: Faction tier change explained!
Posted: November 16th, 2013, 8:02 pm
by Oak
Altierri wrote:How many authorities can a T2 member have at max?
It says 3
Re: Faction tier change explained!
Posted: November 16th, 2013, 8:04 pm
by Anton Ivanovich
Anton Ivanovich wrote:kiss_of_kill wrote:Zeldak wrote:glad to see this happen, I like it
Tier 2 can /fcartow? /ftog?
Re: Faction tier change explained!
Posted: November 16th, 2013, 8:04 pm
by oeoeoe
How many t0 t1 and t2 can a faction have?
Re: Faction tier change explained!
Posted: November 16th, 2013, 8:05 pm
by ray
oeoeoe wrote:How many t0 t1 and t2 can a faction have?
Re: Faction tier change explained!
Posted: November 16th, 2013, 8:09 pm
by Piyush
Good, We t2's Recruit now nd may /whopen GOOD
Re: Faction tier change explained!
Posted: November 16th, 2013, 8:10 pm
by Daci
Nice update.
Re: Faction tier change explained!
Posted: November 16th, 2013, 8:11 pm
by K3
Trapy wrote:Altierri wrote:How many authorities can a T2 member have at max?
A tier 2 faction members may have a maximum of 3 authorities at a time.
That's been answered several times now. There's no need to repeat it.
Tier limits are as they've always been.
Re: Faction tier change explained!
Posted: November 16th, 2013, 8:12 pm
by Anton Ivanovich
K3lroy wrote:Trapy wrote:Altierri wrote:How many authorities can a T2 member have at max?
A tier 2 faction members may have a maximum of 3 authorities at a time.
That's been answered several times now. There's no need to repeat it.
Tier limits are as they've always been.
What about Tier 2 how many can be choosen?
Re: Faction tier change explained!
Posted: November 16th, 2013, 8:12 pm
by Vilen
Awesome update
Re: Faction tier change explained!
Posted: November 16th, 2013, 8:13 pm
by ray
Is there a faction notification when an authority is given to a member ?
Re: Faction tier change explained!
Posted: November 16th, 2013, 8:13 pm
by Bossnigguh
Nice, this will be useful for leaders.
To all who cant understand: T0 = the same as now. T1 = the same as now. T3 will be the current tier 2. The only thing that changes is the new tier added in beetwen (tier 2 that is), those members will be able to /whopen, /invite, /fcar tow etc. if given permission by T0.